Index  |  Accessories  |  Economy Machines  |  Counters  |  PCB Depanelers  |  Terminal Machine  |  Pin Machine  |  Hand Tools  |  BGA Reballer  |  Feeders & Special Machines  |  Flat Cable Separator  |  Parts Lists
 

Maestro 5L

Hektor 2  |  SEP3  |  SEP1 & SEP1M  |  Maestro 2-2M  |  Maestro 3E  |  SEP2 & SEP2M  |  Maestro 4S

Maestro 5L  |  SEP4  |  DP Hand Tools  |  Hektor & SEP3 Blades  |  SEP & Maestro Blades
 

 

MAESTRO 5L 8934520 (8931300 discontinued model offered with standard blades) The Maestro 5 is used whenever a large number of pre-scored boards need to be separated. Up to 15 PCBs arranged next to one another can be separated simultaneously. The maximum passage width is 310 mm. The distances and the number of circular blades are adapted to the PCB. Solid and precisely manufactured blade shafts ensure smooth PCB separation. The hardened and ground and titanium coated circular blades achieve a high running performance. PCBs are inserted to the guide manually or are fed automatically by a loader or external conveyor belt. When separated, the PCBs are deposited on the built-in conveyor belt. A SMEMA interface provided, installation in an assembly line is possible (for information see the operator's manual). With the help of a base frame vertically adjustable, MAESTRO 5L can be adapted to any application. A possibility to connect an extraction and filter device is in preparation. The Maestro 5L is supplied with an adjustable base this way it can be adapted optimally to every requirement. Click here to see a video of this machine.       Maestro 5L Specs PDF                                                                                                                                                                                                      top Outside dimensions increased after separation: typically 0.2 mm The milled groove may be interrupted by cutouts.                                                                                                                                                                                                                                     top TECHNICAL DATA   Separation method   Component side Circular blade Solder side Circular blade Operation Motor-driven Separation speed 100 - 220 mm/s to be set in ten steps PCB length light barrier activated light barrier deactivated 100 - 570 mm up to 2,000 mm PCB width up to 310 mm Residual off-cut width at least 3 mm Component height Component side up to 30 mm Solder side up to 10 mm Number of circular blades up to 16 per blade shaft Programming Display Separation speed Separation length resp. number of PCBS Control buttons Start, Stop, Reverse Programming buttons Separation speed setting Monitoring Detection of separation length Accumulation before / behind the blades Conveyor belt finally stopping Interfaces External start / stop SMEMA (round, 14 pins)   Power supply 230/115 VAC, 50/60 Hz Temperature / humidity   Operation Stock Transport  + 10 - 35°C / 10 - 85 % not condensing  0 - 60°C / 20 - 80 % not condensing – 25 - 60°C / 20 - 80 % not condensing Width x Height x Depth 440 x 750 - 1,000 x 1,100 mm Weight 63 kg Approvals CE, FCC Class A   SPARE PARTS         8934803.001         Circular blade, width 8 mm      893xxxx.001    Circular blade, customer-specific   Maestro 5L Specs PDF