Economy Lead Cut & Bend Machines - Electronic Component Lead Formers - Manual Economy Lead Forming Equipment - Olamef EC Line of Economy Manual Machines

TP6/EC
Manual cutting bending machine for taped axial components. The standard
version is designed for components with
lead diameters from .015-.051" (0.4-1.3mm). Other versions are available for reduced bend from body, fixed pitches .2, .3, .4" or 5.08, 7.62, 10.16mm) and heavy leads (up to .055" or1.4mm)
The machine is fully adjustable and it
comes with all the tools necessary for the adjustments. The BR6 reel holder is available for the EC machines.

TP6/EC Specs PDF top

If you need a motorized machine and or need to process loose parts, please see the TP6/A which is a regular TP6 machine with Motor-98 and CS10 loose parts feeder. TP6 Spec PDF
When it is necessary to bend very close to the body and the components are not taped with the component body properly centered, the BODY GUIDES feed the tape by keeping the component body centered at all times. The body guides are used instead of the tape guides. More info on Body Guides PDF
Do not want to buy a motor and loose parts feeder but still have to prep loose parts? We have TAPE GUIDES suitable for loose components that facilitate feeding low volumes of loose parts. More info on Tape Guides for Loose Components PDF

TP6/R-EC

Manual cutting machine for taped radial components. The TP6/R can be adjusted easily for different lead lengths.

It is available for two types of tape hole pitch:
TP6/R-EC/11 for tape pitch 12.7mm (.5")
TP6/R-EC/12 for tape pitch 15mm (.59")

The BR6 reel holder is available for the EC machines.
TP6/R-EC Specs PDF


        TAPE PITCH                                                                                                       top

Tape Pitch drawing PDF
The TP6/R-EC is the only Economy machine available in a motorized version. The machine needs to be ordered motorized since the motor cannot be added later.

TP6/V-EC
Manual cutting bending machine for taped axial components for vertical mount.
It comes in two versions:
- For lead diameters .019-.031" (0.5-0.8mm) - For .031-.051" (0.8-1.3mm).

For loose parts and a motorized machine, please see the TP6/V-A.

TP6/V-EC Specs PDF top