Machines for Radial Taped Components

Machines for Radial Taped Components

CUTTING MACHINES

MOTORIZED MACHINES

TP6/R
Manual machine to cut
radial taped components. It is available for two types of tape hole pitch:
12.7mm (.5") or 15mm (.59").

TAPE PITCH

The TP6/R can be adjusted easily for different lead lengths.

If you need an economical machine, see the TP6/R-EC also available in the the two tape pitch versions.

TP6/R Specs PDF

TP6/R-M
TP6/R machine with
Motor-98

Other accessories available for this machine:
BR6 and TNS/11

CUTTING AND FORMING MACHINES

MANUAL MACHINES

MOTORIZED MACHINES

TP/R-PR
Manual pneumatic machine
to cut & form radial taped components. The upper movable die is controlled by the vertical stroke of the cylinder. The same die will
form a variety of lead pitches without the need of any adjustments.
There are 10 standard interchangeable dies available. Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.


93.0001	93.0002	93.0003	93.0004	93.0005

93.0006	93.0007	93.0008	93.0010	93.0011

TP/R-PR Specs PDF

TP/R-PR/AS
TP/R-PR machine with
AS1 automatic system. The AS1 advances the tape and controls the forming die. It can be supplied for the 2 common tape hole pitches:
12.7mm (.5") or 15mm (.59").

An additional accessory for the TP/R-PR is the BR1, reel holder.