Forming Hand Tools - Piergiacomi Quality Hand Tools - Forming Tools for Electronic Components

Forming Hand Tools
DF0001

Our bending and cutting tools for electronic components are made in
Italy by Piergiacomi.

The following chart shows the different Forming Hand Tools we offer.

Forming Hand Tools PDF

TOOLS CHART | TOOLS SPECS

PART NUMBER

LEAD DIAMETER Ø mm

AWG

DESCRIPTION

1.02

TS 30
A special tool that cuts and presses the component wire against the PCB in one operation

1.02

TP 30
A special tool that cuts and bends the component wire against the PCB in one operation

1.02

TP 5000/15
Specially designed tool for end cutting, suitable for access in dense areas of PCBs. It cuts and bends the component lead in one operation, fixing it to the circuit board

1.02

PNR 30
Specially designed tool that pre-forms the component lead with a "C" shape Stand-off

top

1.02

PNG 5000
Specially designed tool for the pre-forming of components in a C shape. Its special radius enables components to be pre-formed without any stress

1.02

PNR 5000
A special tool that cuts and pre-form the component wire in one operation. Lenght setting is carried out by means of a sliding stop.

1.02

PTR 30C
Pre-forms the component wire in a C shape and cuts off the residual part

1.02

PTR 30 L
Pre-forms the component wire in a L shape and cuts off the residual part

top

1.02

PPR 5001
Pre-forms the component wire in a U shape

Code	a	b
PPR5001	10.16	15
PPR5002	12.70	18
PPR5003	15.24	20

0.8

PNI 5000
Specially designed tool for pre-forming and cutting of IC pins in one operation

1.3

PN 5040
Pre-forms the component wire at a 90° angle

1.3

PN 5050
Specially designed tool for the pre-forming of centre lead of TO 220 with 3.81mm pitch

top

1.3

PN 5050/14
Specially designed tool for the pre-forming of centre lead of TO 220 with 3.00mm pitch

1.3

PN 5050/15
Specially designed tool for the pre-forming of centre lead of TO 220 with 2.5mm pitch

1.3

PN 5050/3
Specially designed tool for the pre-forming of centre lead of TO 247with 5.08mm pitch

1.3

PN 5050/4
Specially designed tool for the pre-forming of side leads of TO 247 with 5.08mm pitch

top

1.3

PN 5050/10
Specially designed tool for the pre-forming of side leads of TO 220 with 2.5mm pitch

1.3

PN 5050/6
Specially designed tool that enables TO220 component leads to be bent at a 90°angle in a single operation, in such a way that the centre lead will be 2.54mm longer than the side leads

1.3

PN 5050/7
Specially designed tool that enables TO220 component leads to be bent at a 90°angle in a single operation, in such a way that the centre lead will be 2.54mm shorter than the side leads.

BACK TO TOOLS CHART

TOOLS CHART | TOOLS SPECS

BACK TO TOOLS CHART
top

BACK TO TOOLS CHART

BACK TO TOOLS CHART
top

BACK TO TOOLS CHART

Forming Hand Tools PDF