TAPED COMPONENTS
|
LOOSE COMPONENTS
|
FOR TAPED COMPONENTS, THE MACHINES CAN BE
MANUAL OR MOTORIZED
|
TO USE THE LOOSE COMPONENTS MACHINES NEED TO BE MOTORIZED
|
 
TP6
Cut and bend machine for axial components. The standard version is designed for leads with lead diameters from .015 - .051" (0.4-1.3mm)
Other versions available for reduced bend from body,
fixed pitches (.2", .3", .4" or 5.08mm, 7.62mm, 10.16mm) and for heavy leads (up to .055" or 1.4mm)
TP6 Spec PDF Specs ALL TP6 PDF

TP6/M
A Motor-98 can be connected to the manual TP6 machine.
BODY GUIDES
When it is necessary to bend very close to the body
and the components are not taped with the component body properly centered, the body guides feed the tape by keeping the component body centered at all times.
The body guides are used instead of the tape guides.
More Body Guides info PDF
We also offer Hand Tools for Cut, Form or Cut & Form leads of Electronic Components.
The following video shows the TP6/EC machine. The TP6/EC is the Economy version of the TP6 and works exactly the same way. The only difference is that the TP6 can be motorized and can use the loose feeder CS10 and the economy machine cannot.
|

TP6/A
TP6 machine with
Motor-98 and CS10 loose parts feeder. See other accessories available.
Do not want to buy a motor and loose parts feeder but still have to prep loose parts?
We have tape guides suitable for loose components that facilitate feeding low volumes of loose parts:

More info PDF top |
|
TP6-D
Axial Cut and Bend machine for Axial Components with Delrin Inner Discs
The TP6-D cuts & bends axial components as the regular TP6, with the difference that this machine has Delrin instead of metal inner discs so it will not mark the surface of the leads of the components when it bends them. This is important when working with very small and delicate components and for Military applications.
TP6 Spec PDF
|
top
The TP6-D is available Standard (20.OL11) and Reinforced (20.OL12)
top
|

TP6/PR-B
Cutting, bending and forming machine for axial components. The form obtained is a Stand-off which keeps the body of the component off the board. No dies are required.
Large diameter components only: .039-.055"
(1-1.4mm)
TP6/PR-B Specs PDF
|

TP6/PR-B/A
TP6/PR-B machine with Motor-98 and CS10 loose parts feeder.
top
|
 
TP6/PR-F
Cut, bend and form machine
for axial components.
Three versions are available
depending on the lead
diameter of the components:
1. TP6/PR-F/1 - .019-.035 " (0.5-0.9mm) TP6/PR-F/1 Specs PDF
2. TP6/PR-F/2 - .031-.039 " (0.8-1mm) TP6/PR-F/2 Specs PDF
3. TP6/PR-F/3 - .039-.051 " (1-1.3mm) TP6/PR-F/3 Specs PDF
Various dies are available for each version.
The TNS is always supplied with this machine.
TP6/PR-F ALL Specs PDF
|

TP6/PR-F/A
TP6/PR-F machine with Motor-98/A and CS40 loose parts feeder.
top
|
 
TP6/V
Cut and bend machine for axial components for vertical mount.
Two main versions are available. The first one for components with lead diameters .019-.031" (0.5-0.8mm). The second one for thicker leads .031-.051" (0.8-1.3mm).
Tooling for different pitches is available.
TP6/V Specs PDF
|

TP6/V-A
TP6/V machine with
Motor 98 and CS30 loose parts feeder.
top
|

TP6/V-PR
Cut, bend and form machine for axial components for vertical mount.
The standard form will lock the component into the PCB. Handles components with lead diameters from .019-.031" (0.5-0.8mm).
Pitches .100" (2.54mm) and .200" (5.08mm) are available.
TP6/V-PR Specs PDF
|

TP6/V-PR/A
TP6/V-PR machine with Motor-98/A and CS20 loose parts feeder.
top
|

TP6/S
Cutting, bending and forming machine for axial components for SMD.
This is a special machine and it is necessary to obtain all dimensions when ordering.
TP6/S Specs PDF
|

TP6/S/A
TP6/S machine with Motor-98 and CS10 loose parts feeder.
top
|