Economy Lead Cut & Bend Machines - Electronic Component Lead Formers - Manual Economy Lead Forming Equipment - Olamef EC Line of Economy Manual Machines

TP6/EC | TP6/EC Video | TP6/R-EC | TP6/R-EC Video | TP6/V-EC

The EC Line was designed for Taped Components. Cannot be motorized.

TP6/EC
Manual cutting bending machine for taped axial components. The standard version is designed for components with lead diameters from .015-.051" (0.4-1.3mm).
Other versions are available for reduced bend from body, fixed pitches
.2, .3, .4" (5.08, 7.62, 10.16mm) and heavy leads up to .055" (1.4mm)

The TP6/EC machine is fully adjustable and it comes with all the tools necessary for the adjustments.

The BR6 reel holder is available for the EC machines.

TP6/EC Specs PDF top

If you need a motorized machine and or need to process loose parts, please see the TP6/A which is a regular TP6 machine with Motor-98 and CS10 loose parts feeder. TP6 Spec PDF
When it is necessary to bend very close to the body and the components are not taped with the component body properly centered, the BODY GUIDES feed the tape by keeping the component body centered at all times. The body guides are used instead of the tape guides. More info on Body Guides PDF
Do not want to buy a motor and loose parts feeder but still have to prep loose parts? We have TAPE GUIDES suitable for loose components that facilitate feeding low volumes of loose parts. More info on the tape guides for loose components PDF We also offer the PR3 Hand Forming Tool as well as other Hand tools to CUT, FORM, OR CUT & FORM leads of Electronic Components.

The video below shows the TP6/EC in operation. top

top

TP6/R-EC

Manual cutting machine for taped radial components. The TP6/R can be adjusted easily for different lead lengths.

The BR6 reel holder is available for the EC machines.

TP6/R-EC Specs PDF        Preformadoras de Bajo Costo

                                                                                                                               top

The TP6/R-EC is available for
two types of tape hole pitch:

TP6/R-EC/21 for tape pitch 12.7mm (.5")

TP6/R-EC/22 for tape pitch 15mm (.59")

Tape Pitch drawing PDF TAPE PITCH

The video below shows the TP6/R-EC in operation. top

top

TP6/V-EC
Manual cutting bending machine for taped axial components for vertical mount.

It comes in two versions:
- For lead diameters .019-.031" (0.5-0.8mm)
- For .031-.051" (0.8-1.3mm).

For loose parts and a motorized machine, please see the TP6/V-A.

TP6/V-EC Specs PDF top