Accessories

MOTOR 98

The OLAMEF MOT 98 (7915030) is a motor drive unit that attaches to the TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R manual machines.
This accessory can be purchased separately or as part of the equipment. A foot pedal to control the motor is available (600023).
The motors are necessary when planning to use a loose component feeder.

MOT 98 Specs PDF top

MOTOR 98/A

The OLAMEF MOT-98/A (7915032) is a motor drive units that attaches to the following TP6 manually operated machines: TP6/PR-F and TP6/V-PR.
This accessory can be purchased separately or as part of the equipment when any model is supplied motorized. A foot pedal to control the motor is available (600023).
The motors are necessary when planning to use a loose component feeder.

MOT 98-A Specs PDF top

MOTOR IC/F

The OLAMEF MOT-IC/F is a motor drive units that attaches to the TP/IC-F.
This accessory can be purchased separately or as part of the equipment when this model is supplied motorized.
The MOT-IC/F comes with a speed control knob to adjust the operation speed.

MOT IC/F Specs PDF top

AS1

The OLAMEF AS1 (95.OL11 for P=12.7mm and 95.OL13 for P=15mm) is an automatic system for the TP/R-PR manual machine. The driving wheel moves step by step stopping the tape during the preforming operation. It can be supplied to adapt to the hole pitches on the component tape: 12.7 mm (.5") and 15 mm (.59").

AS1 Specs PDF top

LOOSE FEEDERS

CS10 | CS20 | CS30 | CS40

CS10

The CS10 (51.0100) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machines: TP6, TP6/PR-B, TP6/S.
The best feeding results and smoother performance is obtained when using the motorized version.

CS10 Specs PDF top

CS20

The CS20 (51.0200) is a loose component feeder. This accessory has been designed to feed loose axial components to the TP6/V-PR machine. The best feeding results and smoother performance is obtained when using the motorized version.

CS20 Specs PDF top

CS30

The CS30 (51.0300) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machine TP6/V.
The best feeding results and smoother performance is obtained when using the motorized version.

CS30 Specs PDF top

CS40

The CS40 (51.0400) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machine TP6/PR-F.
The best feeding results and smoother performance is obtained when using the motorized version.

CS40 Specs PDF top

REEL & TUBE HOLDERS

BR6 | BR3 | BR5

BR6

The BR6 (400200) is a reel support holder for axial and radial components. This accessory has been designed for the following machines: TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R and the EC Line. top

BR3

The BR3 (78.0001 for P=12.7mm and 78.0002 for P=15mm) is a reel holder for taped radial components. This accessory has been designed to attach to the TP/TC4 machine.

BR3 Specs PDF top

BR5

The BR5 (78.0005) is an accessory designed to attach to the TP/TC4 machine to hold a tube of transistors to cut their leads.

BR5 Specs PDF top

OTHER ACCESSORIES

TNS

The TNS helps to pull the waste tape out of the back of the machine after the components have been cut and formed. This attachment mounts easily to any of the machines designed for taped components. Two models are available: TNS/11 (21.0011) for TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R and the TNS/13 (21.0013)for TP6/V-PR. The TNS/13 comes already mounted on the TP6/PR-F.

TNS Specs PDF top